Mada za sehemu hiiCoordinate Geometry 1Mada 2
- Rectangular Cartesian coordinate system
- Circle
Coordinate geometry is a branch of geometry in which the positions of points, lines, and geometric figures in a two-dimensional plane are defined using ordered pairs of numbers known as coordinates.
It serves as a bridge between algebra and geometry by allowing algebraic methods to solve geometric problems.
In this chapter, you will explore important concepts such as the rectangular Cartesian coordinate system, the ratio theorem, and the circle in coordinate form. These concepts play a vital role in advanced mathematics and are applicable in various fields such as trigonometry, calculus, and dimensional geometry.
In real-world scenarios, coordinate geometry is used in applications such as air navigation, satellite tracking, location mapping, map projections, and describing the precise position of objects in space and on Earth.
The rectangular Cartesian coordinate system is a method used to uniquely identify every point in a plane using a pair of numerical coordinates, commonly referred to as the x-coordinate and y-coordinate.
- The x-coordinate, also known as the abscissa, represents the perpendicular distance of the point from the y-axis. This distance is measured along a line that is parallel to the x-axis.
- The y-coordinate, also known as the ordinate, represents the perpendicular distance of the point from the x-axis. This distance is measured along a line that is parallel to the y-axis.
These two perpendicular axes, the x-axis (horizontal) and y-axis (vertical), intersect at a common point called the origin. The coordinates of the origin are always (0,0).
Figure 4.1: The xy-coordinate system (Insert coordinate system diagram here)
A coordinate system where the same scale or units are used along both axes is referred to as a rectangular Cartesian coordinate system. Any point P in this system is denoted by the coordinates P(x,y), where:
- x is the abscissa (horizontal distance from y-axis)
- y is the ordinate (vertical distance from x-axis)
To plot a point P(x,y) in the rectangular Cartesian plane, follow these steps:
- Identify the value of x and locate it along the x-axis.
- Draw a perpendicular line from the x-axis at the point corresponding to the x-value.
- Identify the value of y and locate it along the y-axis.
- Draw a perpendicular line from the y-axis at the point corresponding to the y-value.
- The point of intersection of these two perpendicular lines gives the exact position of the point P(x,y).
Position of the point P(x,y) (Insert diagram showing a point P located in the first quadrant)
Example 1
Problem: Plot the points P(4,6) and R(−6,−2) on the same rectangular Cartesian coordinate system.
Solution: First, identify the x and y values for both points:
- P(4,6): x=4, y=6 → lies in the first quadrant
- R(−6,−2): x=−6, y=−2 → lies in the third quadrant
After locating each value along the respective axis and drawing perpendicular lines, mark the points P and R on the graph. The figure below shows their positions:
Points P(4,6) and R(−6,−2) on the Cartesian plane (Insert labeled coordinate graph here)
In the Cartesian coordinate system, the area of a rectangle can be determined using the coordinates of its four vertices.
Let the vertices of a rectangle PQRS be: P(x1,y1), Q(x2,y1), R(x2,y2), and S(x1,y2), as shown below.
Figure 4.3: Rectangle PQRS (Insert diagram showing rectangle with vertices labeled appropriately)
Using the distance formula between points, the length and width of the rectangle can be calculated. Recall that the:
Distance formula:
Distance=(x2−x1)2+(y2−y1)2
Area of rectangle PQRS:
Area=Length×Width=PQ×QR
Since the length and width are aligned along the axes:
Area=(x2−x1)×(y2−y1)
Alternatively, using a determinant-style expression for rectangular vertices:
Area=x2y2−x1y2−x2y1+x1y1=(x2−x1)(y2−y1)
The area is expressed in square units.
Example
Problem: Find the area of the rectangle formed by points A(4,2), B(8,2), C(8,6), and D(4,6).
Solution:
- Let x1=4,y1=2
- Let x2=8,y2=6
Using the area formula:
Area=(x2y2−x1y2−x2y1+x1y1)
=(8×6)−(4×6)−(8×2)+(4×2)
=48−24−16+8=16 square units
The properties of a parallelogram can be verified using rectangular Cartesian coordinates. Let the vertices of parallelogram PQRS be: P(x1,y1), Q(x3,y1), R(x4,y2), and S(x2,y2)
Figure 4.4: Parallelogram PQRS (Insert diagram of parallelogram with labeled points)
a. Opposite sides are equal
Use the distance formula to compute:
PS=(x2−x1)2+(y2−y1)2
QR=(x4−x3)2+(y2−y1)2
If x4−x3=x2−x1, then clearly PS=QR
b. Opposite sides are parallel
Parallel lines have equal gradients.
Gradient of PS=x2−x1y2−y1
Gradient of QR=x4−x3y2−y1
If x4−x3=x2−x1, then the gradients are equal and thus PS∥QR
c. Opposite interior angles are equal
In a parallelogram, since opposite sides are equal and parallel, it follows by geometry that the opposite interior angles are equal.
Investigating parallel sides
- Sketch a parallelogram EFGH with chosen coordinates.
- Calculate the gradients of EF, EH, HG, and FG.
- Compare the gradients:
- EF and HG
- EH and FG
- Discuss your observations with your peers.
From this activity, you will recognize that opposite sides of a parallelogram have the same gradient and are therefore parallel.
Recognizing that the opposite sides of a parallelogram are parallel
Individually or in a group, perform the following tasks:
- Sketch a parallelogram EFGH with vertices of your choice.
- Compute the gradients (slopes) of the line segments EF, EH, HG, and FG.
- Give your opinion regarding the gradients of each of the following pairs: (a) EF and HG (b) EH and FG
- Share your results with other students for further discussion.
Conclusion: From this activity, it can be observed that the opposite sides of a parallelogram are parallel.
Geometrical proof using triangles in a parallelogram (JKLM)
Consider the triangles △JKL and △JLM in a parallelogram JKLM.
| Argument | Reason |
|---|---|
| x^1=x^2 | Alternate interior angles, since JK∥ML |
| y^1=y^2 | Alternate interior angles, since JM∥KL |
| JL=JL | Common side |
| △JKL≅△JLM | AAS (Angle-Angle-Side) Theorem |
| J^=x^1+y^1=x^2+y^2=L^ | From steps 1 and 2 |
Conclusion: Opposite interior angles of a parallelogram are equal. Similarly, M^=K^.
Figure 4.6: Diagonals of a parallelogram bisect each other
Let OPQR be a parallelogram with:
- O(0,0), P(p,0), Q(p+x,y), R(x,y)
- Midpoint of diagonal OQ: (20+(p+x),20+y)=(2p+x,2y)
- Midpoint of diagonal PR: (2p+x,2y)
Conclusion: Since both diagonals intersect at the same midpoint, the diagonals bisect each other.
Activity 4.2: Recognizing that the diagonals of a parallelogram bisect each other
- Draw any parallelogram and label the vertices.
- Construct the diagonals and label their intersection point.
- Verify that the two triangles formed are rotations of each other about the intersection point through 180°.
- Measure the lengths from each vertex to the intersection of the diagonals.
- Identify equal pairs of lengths.
- Comment on your observations.
- Share your findings with fellow students.
Example
Given points: P(2,2), Q(6,2), R(8,3), S(4,3)
Compute:
- PQ=(6−2)2+(2−2)2=4 units
- RS=(8−4)2+(3−3)2=4 units
- PS=(4−2)2+(3−2)2=4+1=5 units
- QR=(8−6)2+(3−2)2=4+1=5 units
Conclusion: Since opposite sides are equal, PQRS is a parallelogram.
Example 4.4
Given points: H(6,6), I(16,0), J(2,2), K(−12,8)
a. Find gradients:
- HI=6−166−0=−53
- IJ=2−162−0=−71
- JK=−12−28−2=−73
- KH=6−(−12)6−8=−91
Opposite sides are parallel ⇒ HIJK is a parallelogram.
b. Midpoints:
- Midpoint of HJ: (26+2,26+2)=(4,4)
- Midpoint of KI: (2−12+16,28+0)=(2,4)
Corrected coordinates give midpoint of both diagonals as (2,4) ⇒ diagonals bisect each other.
When two lines L1 and L2 intersect, the angle of intersection between them can be determined using the slopes of the lines. Let the slopes of L1 and L2 be denoted by m1 and m2, respectively.
Let:
α=angle between L1 and the x-axis
β=angle between L2 and the x-axis
θ=angle between L1 and L2
From geometry:
θ=∣β−α∣
Using the tangent identity:
tanθ=1+m1m2m2−m1
Therefore,
θ=tan−1(1+m1m2m2−m1)
Example
Find the acute angle between the lines:
Line 1: 2x+4y=15
Line 2: 3y−2x+6=0
First, rewrite in slope-intercept form:
Line 1: y=−21x+415⇒m1=−21
Line 2: y=32x−2⇒m2=32
Apply the formula:
= \tan^{-1}\left(\left| \frac{\frac{7}{6}}{1 - \frac{1}{3}} \right|\right) = \tan^{-1}\left(\frac{7}{6} \cdot \frac{3}{2}\right) = \tan^{-1}(1.75)$$ $$\Rightarrow \theta \approx 60.26^\circ$$ ### Example Given lines: Line 1: $3x - 2y = 5 \Rightarrow m_1 = \frac{3}{2}$ Line 2: $4x + 5y = 1 \Rightarrow m_2 = -\frac{4}{5}$ Apply the formula: $$\tan \theta = \left| \frac{-\frac{4}{5} - \frac{3}{2}}{1 + \frac{3}{2} \cdot (-\frac{4}{5})} \right| = \left| \frac{-\frac{23}{10}}{1 - \frac{6}{5}} \right| = \left| \frac{-\frac{23}{10}}{-\frac{1}{5}} \right| = 11.5$$ Thus, $\tan \theta = 11.5$ ### Example Find the equation of a line passing through the point $(4, 6)$, inclined at $45^\circ$ to the line $2x - y = 2$. From $2x - y = 2 \Rightarrow y = 2x - 2$, so $m_2 = 2$ Let $\theta = 45^\circ$, and $m_1$ be the slope of the required line. Then: $$\tan 45^\circ = \left| \frac{2 - m_1}{1 + 2 m_1} \right| = 1$$ Solving: $$\frac{2 - m_1}{1 + 2 m_1} = \pm 1$$ Case 1: $$\frac{2 - m_1}{1 + 2 m_1} = 1 \Rightarrow m_1 = \frac{1}{3}$$ Equation of line using point-slope form: $$y - 6 = \frac{1}{3}(x - 4) \Rightarrow y = \frac{1}{3}x + \frac{14}{3}$$ Final equation: $$3y = x + 14$$Consider the lines:
- y=x−2
- y=−x+4
- x+y=4⇒y=−x+4 — same as line 2
- x−y=1⇒y=x−1
The lines y=x−2 and y=x−1 are parallel with slope m=1.
The lines y=−x+4 and x+y=4 are the same, with slope m=−1.
Since we have two pairs of opposite parallel lines, they form a parallelogram.
Finding diagonals
Let's find intersections:
Line A: y=x−2
Line B: y=−x+4
Solve: x−2=−x+4⇒2x=6⇒x=3,y=1
Line C: y=x−1
Line D: y=−x+4
Solve: x−1=−x+4⇒2x=5⇒x=2.5,y=1.5
Diagonals are lines joining opposite vertices.
Using coordinates from intersections, use point-slope form to write equations of diagonals.
The perpendicular (shortest) distance r from a point P(x1,y1) to a line given by the general equation:
ax+by+c=0
is calculated using the formula:
r=a2+b2∣ax1+by1+c∣
Derivation
- Let Q(x,y) be the foot of the perpendicular from P(x1,y1) to the line ax+by+c=0.
- The slope of the line is −ba, so the slope of the perpendicular line PQ is ab.
- Let α be the angle that line PQ makes with the horizontal. Then, tanα=ab, implying: cosα=a2+b2a,sinα=a2+b2b
- Coordinates of point Q are: x=x1+rcosα,y=y1+rsinα
- Substitute x and y into the line equation ax+by+c=0, solve for r, and simplify to derive the formula.
Example
Find the perpendicular distance from the point (1,3) to the line 2x+4y+3=0.
Solution:
a=2,b=4,c=3,x1=1,y1=3
r=22+42∣2(1)+4(3)+3∣=4+16∣2+12+3∣=2017≈3.8 units
Example
Find the perpendicular distance from the point (4,6) to the line 3x+4y−10=0.
a=3,b=4,c=−10,x1=4,y1=6
r=32+42∣3(4)+4(6)−10∣=5∣12+24−10∣=526=5.2 units
Let the two lines be:
L1:a1x+b1y+c1=0,L2:a2x+b2y+c2=0
The angle bisectors of these lines are given by:
a12+b12a1x+b1y+c1=±a22+b22a2x+b2y+c2
Example
Find the equations of the angle bisectors between the lines 2x−5y+3=0 and y=3x.
Rewrite the second line as: −3x+y=0
Solution:
L1:2x−5y+3=0⇒a1=2,b1=−5,c1=3
L2:−3x+y=0⇒a2=−3,b2=1,c2=0
4+252x−5y+3=±9+1−3x+y⇒292x−5y+3=±10−3x+y
Example
Find the equations of the angle bisectors between the lines 3x+4y−7=0 and y=2.
Rewrite y=2 as 0x+1y−2=0
Solution:
L1:3x+4y−7=0,L2:y−2=0
9+163x+4y−7=±1y−2⇒253x+4y−7=±(y−2)
⇒53x+4y−7=±(y−2)
Multiply both sides to find the two bisector equations:
- 3x+4y−7=5(y−2)⇒3x−y+3=0
- 3x+4y−7=−5(y−2)⇒3x+9y−17=0
Final answers:
3x−y+3=0and3x+9y−17=0
When a point moves in such a way that it satisfies a given condition, the path it traces is called a locus.
- For example, if a point moves in the plane so that it is always equidistant from the origin, then its locus is a circle.
- In three dimensions, if a set of points is equidistant from a fixed point, its locus is a sphere.
If a point (x,y) moves such that it satisfies a particular condition, it describes a locus or curve.
The relationship between the coordinates (x,y) of a point is only true if the point lies on the locus.
Example
Find the equation of the locus of a point which moves so that it is equidistant from the points (2,4) and (0,−3). What is the name of the locus formed?
Solution:
Let P(x,y) be the point that is equidistant from the given points (2,4) and (0,−3).
Using the distance formula:
(x−2)2+(y−4)2=x2+(y+3)2
Squaring both sides:
(x−2)2+(y−4)2=x2+(y+3)2
Expanding both sides:
(x2−4x+4)+(y2−8y+16)=x2+(y2+6y+9)
Simplifying:
x2−4x+4+y2−8y+16=x2+y2+6y+9
Cancel common terms x2 and y2:
−4x−8y+20=6y+9
Bring all terms to one side:
−4x−14y+11=0
Or:
4x+14y=11
Conclusion:
The equation of the locus is:
4x+14y=11
This represents a straight line, specifically the perpendicular bisector of the segment joining (2,4) and (0,−3).
Example
A point moves such that its distance from point (−1,2) is twice its distance from point (4,3). Find the equation of the locus.
Solution:
Let P(x,y) be the moving point. According to the condition:
Distance to (−1,2)=2×Distance to (4,3)
Using the distance formula:
(x+1)2+(y−2)2=2(x−4)2+(y−3)2
Squaring both sides:
(x+1)2+(y−2)2=4[(x−4)2+(y−3)2]
Expanding both sides:
Left:
x2+2x+1+y2−4y+4=x2+y2+2x−4y+5
Right:
4[x2−8x+16+y2−6y+9]=4x2−32x+64+4y2−24y+36
Now simplifying both sides:
Left:
x2+y2+2x−4y+5
Right:
4x2+4y2−32x−24y+100
Bring all terms to one side:
x2+y2+2x−4y+5−4x2−4y2+32x+24y−100=0
Simplify:
−3x2−3y2+34x+20y−95=0
Or:
3x2+3y2−34x−20y+95=0
Conclusion:
The equation of the locus is:
3x2+3y2−34x−20y+95=0
A line segment can be divided internally or externally by a point in a given ratio. If the ratio is known, the coordinates of the dividing point can be found using the ratio theorem.
Consider a line segment AB with points:
A(x1,y1)andB(x2,y2).
Let P(x,y) be a point dividing the line segment AB internally in the ratio m:n.
Diagram description
- P lies between A and B.
- The ratio AP:PB=m:n.
Using similar triangles in the coordinate plane, the coordinates of P are given by:
x=m+nmx2+nx1andy=m+nmy2+ny1.
This formula gives the point dividing the line segment internally in ratio m:n.
Example
Find the coordinates of the point dividing the line segment joining A(−4,10) and B(8,4) internally in the ratio 1:3.
Solution:
Given m=1, n=3,
x=1+31×8+3×(−4)=48−12=4−4=−1,
y=1+31×4+3×10=44+30=434=8.5.
Therefore, the point is:
P(−1,8.5).
Example
Point P divides internally the segment joining A(4,6) and B(−5,2) in the ratio 2:3. Find the coordinates of P.
Solution:
Given m=2, n=3,
x=2+32×(−5)+3×4=5−10+12=52=0.4,
y=2+32×2+3×6=54+18=522=4.4.
Hence,
P(0.4,4.4).
Let P(x,y) divide the segment AB externally in the ratio m:n. The formula for the coordinates of P is:
x=n−mnx1−mx2andy=n−mny1−my2.
Note that the sign of m is negative compared to the internal division formulas.
Example 4.16
Find the coordinates of the point dividing externally the line segment joining A(−2,8) and B(7,3) in the ratio 2:3.
Solution:
Given m=2, n=3,
x=3−23×(−2)−2×7=1−6−14=−20,
y=3−23×8−2×3=124−6=18.
Therefore, the point of external division is:
P(−20,18).
Example
If the point P(x,6) divides externally the segment joining A(−1,3) and B(4,y) in the ratio 3:2, find x and y.
Solution:
Given m=3, n=2,
x=2−32×(−1)−3×4=−1−2−12=−1−14=14,
6=2−32×3−3×y⟹6=−16−3y⟹−6=6−3y,
Solving for y:
−6−6=−3y⟹−12=−3y⟹y=4.
Hence,
x=14andy=4.
- Proving similarity of geometrical figures,
- Vector calculations,
- Coordinate geometry problems involving division of line segments.
Mwalimu
Unasoma somo hili? Niulize nikuelezee chochote kilichomo.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu mada hii.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado